 |
 |
 |
||||||||||
 |
 |
 |
 |
 |
 |
   |
 |
|||||
 |
||||||||||||
  |
||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||
| Exterior Installation | ||
| Prepare base as you would for a standard paver installation. Lay sheets down on prepared base. |
 |
|
| Run compactor over stone surface and wet application prior to filling joints. |
 |
|
| Apply EcoSystems Grout, water permeable silica epoxy mortar. Joints can also be filled with other materials such as course sand, stabilized sand or fine gravel. It is not recommended to use stablized sand or course sand in areas intended for vehicle traffic. |
 |
|
| Wet stones thoroughly. Squeegee EcoSystems Grout over entire stone surface removing excess sand from the top of stones. |
 |
|
| Enjoy your Cobble
Systems application for years to come! |
 |
|
| Interior Installation | ||
| Use 3/4” cobble for indoors. Apply sheets over suitable adhesive on properly prepared subfloor. Fill joints with suitable sanded grout or saltillo tile grout. |
 |
|
|
Tools available from Cobble Systems or local Supply House |
| |
|
Fiskar's Soft Grip Multi-Snip - Model # 7925 |
 | |
| Ettore Moss Foam Squeegee - Model # 61018 |
 | |
| Use a screw to secure squeegee head to handle. |
 | |